Type

Conference Proceedings

Authors

Dermot Brabazon
Sumsun Naher
S.N. Aqida

Subjects

Engineering

Topics
image analysis laser spot size aisi h13 tool steel grain size materials surface roughness mechanical engineering laser surface modification

Laser surface modification of H13 die steel using different laser spot sizes (2011)

Abstract This paper presents a laser surface modification process of AISI H13 tool steel using three sizes of laser spot with an aim to achieve reduced grain size and surface roughness. A Rofin DC-015 diffusion-cooled CO2 slab laser was used to process AISI H13 tool steel samples. Samples of 10 mm diameter were sectioned to 100 mm length in order to process a predefined circumferential area. The parameters selected for examination were laser peak power, overlap percentage and pulse repetition frequency (PRF). Metallographic study and image analysis were done to measure the grain size and the modified surface roughness was measured using two-dimensional surface profilometer. From metallographic study, the smallest grain sizes measured by laser modified surface were between 0.51 3m and 2.54 3m. The minimum surface roughness, Ra, recorded was 3.0 3m. This surface roughness of the modified die steel is similar to the surface quality of cast products. The grain size correlation with hardness followed the findings correlate with Hall-Petch relationship. The potential found for increase in surface hardness represents an important method to sustain tooling life.
Collections Ireland -> Dublin City University -> Publication Type = Conference or Workshop Item
Ireland -> Dublin City University -> DCU Faculties and Centres = DCU Faculties and Schools
Ireland -> Dublin City University -> Status = Published
Ireland -> Dublin City University -> DCU Faculties and Centres = DCU Faculties and Schools: Faculty of Engineering and Computing: School of Mechanical and Manufacturing Engineering
Ireland -> Dublin City University -> Subject = Engineering: Mechanical engineering
Ireland -> Dublin City University -> DCU Faculties and Centres = DCU Faculties and Schools: Faculty of Engineering and Computing
Ireland -> Dublin City University -> Subject = Engineering: Materials
Ireland -> Dublin City University -> DCU Faculties and Centres = Research Initiatives and Centres: Materials Processing Research Centre (MPRC)
Ireland -> Dublin City University -> Subject = Engineering
Ireland -> Dublin City University -> DCU Faculties and Centres = Research Initiatives and Centres

Full list of authors on original publication

Dermot Brabazon, Sumsun Naher, S.N. Aqida

Experts in our system

1
Dermot Brabazon
Dublin City University
Total Publications: 162
 
2
Sumsun Naher
Dublin City University
Total Publications: 56